Skip to content

Below is a list of the ULC Standards Committees

Committee & Standards Covered Chair Project Manager
S100A FIRE TESTS

CAN/ULC-S101, STANDARD METHODS OF FIRE ENDURANCE TESTS OF BUILDING CONSTRUCTION AND MATERIALS

CAN/ULC-S102, STANDARD METHOD OF TEST FOR SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS AND ASSEMBLIES

CAN/ULC-S102.2, STANDARD METHOD OF TEST FOR SURFACE BURNING CHARACTERISTICS OF FLOORING, FLOOR COVERINGS, AND MISCELLANEOUS MATERIALS AND ASSEMBLIES

CAN/ULC-S102.3, STANDARD METHOD OF FIRE TEST OF LIGHT DIFFUSERS AND LENSES

CAN/ULC-S102.4, STANDARD METHOD OF TEST FOR FIRE AND SMOKE CHARACTERISTICS OF ELECTRICAL WIRING, CABLES AND NON-METALLIC RACEWAYS

CAN/ULC-S103, STANDARD SPECIFICATION FOR “TIN-CLAD” FIRE DOORS MEETING THE PERFORMANCE REQUIRED BY CAN/ULC-S104

CAN/ULC-S104, STANDARD METHOD FOR FIRE TESTS OF DOOR ASSEMBLIES

CAN/ULC-S105, STANDARD SPECIFICATION FOR FIRE DOOR FRAMES MEETING THE PERFORMANCE REQUIRED BY CAN/ULC-S104

CAN/ULC-S106, STANDARD METHOD FOR FIRE TESTS OF WINDOW AND GLASS BLOCK ASSEMBLIES

CAN/ULC-S107, STANDARD METHODS OF FIRE TESTS OF ROOF COVERINGS

CAN/ULC-S109, STANDARD METHOD FOR FLAME TESTS OF FLAME-RESISTANT FABRICS AND FILMS

CAN/ULC-S110, STANDARD METHODS OF TEST FOR AIR DUCTS

CAN/ULC-S111, STANDARD METHOD OF FIRE TESTS FOR AIR FILTER UNITS

CAN/ULC-S112, STANDARD METHOD OF FIRE TEST OF FIRE DAMPER ASSEMBLIES

CAN/ULC-S112.1, STANDARD FOR LEAKAGE RATED DAMPERS FOR USE IN SMOKE CONTROL SYSTEMS

CAN/ULC-S112.2, STANDARD METHOD OF TEST OF CEILING FIRESTOP FLAP ASSEMBLIES

CAN/ULC-S113, STANDARD SPECIFICATION FOR WOOD CORE DOORS MEETING THE PERFORMANCE REQUIRED BY CAN/ULC-S104 FOR TWENTY MINUTE FIRE RATED CLOSURE ASSEMBLIES

CAN/ULC-S114, STANDARD METHOD OF TEST FOR DETERMINATION OF NON-COMBUSTIBILITY IN BUILDING MATERIALS

CAN/ULC-S115, STANDARD METHOD OF FIRE TESTS OF FIRESTOP SYSTEMS

CAN/ULC-S124, STANDARD METHOD OF TEST FOR THE EVALUATION OF THERMAL BARRIERS FOR FOAMED PLASTIC

CAN/ULC-S126, STANDARD METHOD OF TEST FOR FIRE SPREAD UNDER ROOF-DECK ASSEMBLIES

CAN/ULC-S127, STANDARD CORNER WALL METHOD OF TEST FOR FLAMMABILITY CHARACTERISTICS OF NON-MELTING FOAM PLASTIC BUILDING MATERIALS

CAN/ULC-S129, STANDARD METHOD OF TEST FOR SMOULDER RESISTANCE OF INSULATION (BASKET METHOD)

CAN/ULC-S130, STANDARD METHOD OF TEST FOR IGNITION RESISTANCE OF LOOSE FILL INSULATION (CIGARETTE METHOD)

CAN/ULC-S132, STANDARD FOR EMERGENCY EXIT AND EMERGENCY FIRE EXIT HARDWARE

CAN/ULC-S133, STANDARD METHOD OF TESTS FOR DOOR CLOSERS INTENDED FOR USE WITH SWINGING DOORS

CAN/ULC-S134, STANDARD METHOD OF FIRE TEST OF EXTERIOR WALL ASSEMBLIES

ULC-S135, STANDARD TEST METHOD FOR THE DETERMINATION OF COMBUSTIBILITY PARAMETERS OF BUILDING MATERIALS USING AN OXYGEN CONSUMPTION CALORIMETER (CONE CALORIMETER)

CAN/ULC-S137, STANDARD METHOD OF TEST FOR FIRE GROWTH OF MATTRESSES (OPEN FLAME TEST)

CAN/ULC-S138, STANDARD METHOD OF TEST FOR FIRE GROWTH OF INSULATED BUILDING PANELS IN A FULL-SCALE ROOM CONFIGURATION

CAN/ULC-S139, STANDARD FOR FIRE TEST FOR CIRCUIT INTEGRITY OF FIRE-RESISTIVE POWER, INSTRUMENTATION, CONTROL AND DATA CABLES

CAN/ULC-S142, STANDARD METHOD OF FIRE TEST FOR HEAT AND VISIBLE SMOKE RELEASE FOR DISCRETE PRODUCTS

CAN/ULC-S143, STANDARD METHOD OF FIRE TESTS FOR NON-METALLIC ELECTRICAL AND OPTICAL FIBRE CABLE RACEWAY SYSTEMS

CAN/ULC-S144, STANDARD METHOD OF FIRE RESISTANCE TEST – GREASE DUCT ASSEMBLIES

CAN/ULC-S145, STANDARD METHOD OF TEST FOR THE EVALUATION OF PROTECTIVE COVERINGS FOR FOAMED PLASTIC INSULATION – FULL-SCALE ROOM TEST

CAN/ULC-9705 (ISO 9705), STANDARD FOR FIRE TESTS – FULL-SCALE ROOM TEST FOR SURFACE PRODUCTS

Steve Craft Kevin HF Wu
S300A SECURITY & BURGLAR ALARM EQUIPMENT AND SYSTEMS

CAN/ULC-S301, STANDARD FOR SIGNAL RECEIVING CENTRES CONFIGURATIONS AND OPERATIONS

CAN/ULC-S302, STANDARD FOR INSTALLATION, INSPECTION AND TESTING OF INTRUSION ALARM SYSTEMS

CAN/ULC-S304, STANDARD FOR CONTROL UNITS, ACCESSORIES AND RECEIVING EQUIPMENT FOR INTRUSION ALARM SYSTEMS

ULC-S306, STANDARD FOR INTRUSION DETECTION UNITS

CAN/ULC-S316, STANDARD FOR PERFORMANCE OF VIDEO SURVEILLANCE SYSTEMS

ULC-S318, STANDARD FOR POWER SUPPLIES FOR BURGLAR ALARM SYSTEMS

CAN/ULC-60839-11-1, STANDARD FOR ALARM AND ELECTRONIC SECURITY SYSTEMS – PART 11-1: ELECTRONIC ACCESS CONTROL SYSTEMS – SYSTEM AND COMPONENTS REQUIREMENTS

Dan Nita Wathma Jayathilake
S400A LIVE WORKING

CAN/ULC-60900, HAND TOOLS FOR LIVE WORKING UP TO 1000 V A.C. AND 1500 V D.C.

CAN/UL-60743, LIVE WORKING – TERMINOLOGY FOR TOOLS, EQUIPMENT AND DEVICES

CAN/ULC-60855-1, LIVE WORKING – INSULATING FOAM-FILLED TUBES AND SOLID RODS – PART 1: TUBES AND RODS OF A CIRCULAR CROSS-SECTION

CAN/ULC-60903, LIVE WORKING – GLOVES OF INSULATING MATERIAL

CAN/ULC-60984, SLEEVES OF INSULATING MATERIAL FOR LIVE WORKING

CAN/ULC-61236, SADDLES, POLE CLAMPS (STICK CLAMPS) AND ACCESSORIES FOR LIVE WORKING

CAN/ULC-61243-3, LIVE WORKING – VOLTAGE DETECTORS – PART 3: TWO-POLE LOW-VOLTAGE TYPE

CAN/ULC-61472,  LIVE WORKING – MINIMUM APPROACH DISTANCES FOR A.C. SYSTEMS IN THE VOLTAGE RANGE 72,5 kV TO 800 kV – A METHOD OF CALCULATION

CAN/ULC-61481-1,  LIVE WORKING – PHASE COMPARATORS – PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.

CAN/ULC-S61481-2LIVE WORKING – PHASE COMPARATORS – PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES FROM 1KV TO 36 KV A.C.

Tim Olson Gillian Wintonic
S400B SOLID STATE LIGHTING (SSL)

CAN/ULC-S2577, SUSPENDED CEILING GRID LOW VOLTAGE SYSTEMS AND EQUIPMENT

CAN/ULC-S8752, Organic Light Emitting Diode (OLED) Panels

Joe Musso Julio Morales
S400C FIELD-REPLACEABLE LIGHT EMITTING DIODE (LED) LIGHT ENGINES

CAN/ULC-S8753, STANDARD FOR FIELD-REPLACEABLE LIGHT EMITTING DIODE (LED) LIGHT ENGINES

CAN/ULC-S8754, STANDARD FOR HOLDERS, BASES, AND CONNECTORS FOR SOLID-STATE (LED) LIGHT ENGINES AND ARRAYS

Joe Musso Julio Morales
S400D COMMITTEE ON BATTERIES FOR USE IN ELECTRIC VEHICLES (EV)

CAN/ULC-S2271,BATTERIES FOR USE IN LIGHT ELECTRIC VEHICLE (LEV) APPLICATIONS

CAN/ULC-S2580, STANDARD FOR BATTERIES FOR USE IN ELECTRIC VEHICLES

Diana Pappas Jordan Megan VanHeirseele
S400E COMMITTEE FOR TEMPORARY LIGHTING STRINGS

CAN/ULC-S1088, STANDARD FOR TEMPORARY LIGHTING STRINGS

Joe Musso Amy Walker
S4400 CANNABIS

CAN/ULC-S4400, STANDARD FOR SAFETY OF BUILDING AND FACILITIES UTILIZED FOR THE CULTIVATION, PROCESSING AND PRODUCTION OF CANNABIS

Mark Ramlochan Theresa (Tess) Espejo
S500A PORTABLE FIRE EXTINGUISHERS

CAN/ULC-S504, (Binational with ANSI/UL 299), STANDARD FOR DRY CHEMICAL FIRE EXTINGUISHERS

CAN/ULC-S507, (Binational with ANSI/UL 626), *STANDARD FOR WATER FIRE EXTINGUISHERS

CAN/ULC-S508, (Binational with ANSI/UL 711), STANDARD FOR RATING AND FIRE TESTING OF FIRE EXTINGUISHERS

CAN/ULC-S514, STANDARD FOR DRY CHEMICAL FOR USE IN HAND AND WHEELED FIRE EXTINGUISHERS

CAN/ULC-S522, STANDARD FOR FIRE EXTINGUISHERS AND BOOSTER HOSE

CAN/ULC-S532, STANDARD FOR THE REGULATION OF THE SERVICING OF PORTABLE FIRE EXTINGUISHERS

CAN/ULC-S554, STANDARD FOR WATER BASED AGENT FIRE EXTINGUISHERS

ULC-S557, STANDARD FOR BACK-PACK FIRE EXTINGUISHERS

CAN/ULC-S566, STANDARD FOR HALOCARBON CLEAN AGENT FIRE EXTINGUISHERS

Diane
Haithcock
Nicolette
Weeks
S500B FIRE PROTECTION EQUIPMENT AND SYSTEMS

ULC-S505, *STANDARD FOR FUSIBLE LINKS FOR FIRE PROTECTION SERVICES

CAN/ULC-S511, STANDARD FOR LINED FIRE HOSE FOR INTERIOR STANDPIPES AND MUNICIPAL AND INDUSTRIAL FIRE-PROTECTION SERVICES

CAN/ULC-S513, STANDARD FOR THREADED COUPLINGS FOR 38 MM AND 65 MM FIRE HOSE

CAN/ULC-S515, STANDARD FOR AUTOMOBILE FIRE FIGHTING APPARATUS

CAN/ULC-S518, STANDARD FOR COTTON-SYNTHETIC NON-PERCOLATING FORESTRY HOSE

CAN/ULC-S518.1, STANDARD FOR SYNTHETIC NON-PERCOLATING FORESTRY HOSE

CAN/ULC-S519, STANDARD FOR COTTON-SYNTHETIC PERCOLATING FORESTRY HOSE

CAN/ULC-S519.1, STANDARD FOR SYNTHETIC PERCOLATING FORESTRY HOSE

CAN/ULC-S520, STANDARD FOR FIRE HYDRANTS

CAN/ULC-S543, *STANDARD FOR INTERNAL LUG QUICK-CONNECT COUPLINGS FOR FIRE HOSE

CAN/ULC-S551, STANDARD FOR FORGED EXTERNAL-LUG QUICK-CONNECT COUPLINGS AND ADAPTERS FOR FORESTRY FIRE HOSE

CAN/ULC-S555, STANDARD FOR FIRE AND EMERGENCY SERVICE TECHNICAL RESCUE ROPES AND WATER RESCUE THROW ROPES AND ASSOCIATED EQUIPMENT

CAN/ULC-S558, EXTERNAL-LUG QUICK-CONNECT COUPLINGS AND ADAPTERS FOR FORESTRY FIRE HOSE

CAN/ULC-S574, FORGED 65 mm (2 ½in) EXTERNAL-LUG QUICK-CONNECT COUPLINGS AND ADAPTERS FOR FORESTRY FIRE HOSE

 

Diane
Haithcock
Wathma Jayathilake
S500F FIRE ALARM AND LIFE SAFETY EQUIPMENT AND SYSTEMS

CAN/ULC-S524, STANDARD FOR INSTALLATION OF FIRE ALARM SYSTEMS

CAN/ULC-S525, STANDARD FOR AUDIBLE SIGNAL DEVICES FOR FIRE ALARM SYSTEMS, INCLUDING ACCESSORIES

CAN/ULC-S526, STANDARD FOR VISIBLE SIGNAL DEVICES FOR FIRE ALARM SYSTEMS, INCLUDING ACCESSORIES

CAN/ULC-S527, STANDARD FOR CONTROL UNITS FOR FIRE ALARM SYSTEMS

CAN/ULC-S528, STANDARD FOR MANUAL STATIONS FOR FIRE ALARM SYSTEMS, INCLUDING ACCESSORIES

CAN/ULC-S529 (Binational with ANSI/UL 268), STANDARD FOR SMOKE DETECTORS FOR THE FIRE ALARM SYSTEMS

CAN/ULC-S530 (Binational with ANSI/ULC 521), STANDARD FOR HEAT ACTUATED FIRE DETECTORS FOR FIRE ALARM SYSTEMS

CAN/ULC-S531, STANDARD FOR SMOKE ALARMS

CAN/ULC-S533, STANDARD FOR EGRESS DOOR SECURING AND RELEASING DEVICES

CAN/ULC-S536, STANDARD FOR INSPECTION AND TESTING OF FIRE ALARM SYSTEMS

CAN/ULC-S537, STANDARDS FOR VERIFICATION OF FIRE ALARM SYSTEMS

CAN/ULC-S538, STANDARD FOR CARBON MONOXIDE ALARM SFOR NON-RESIDENTIAL APPLICATIONS

CAN/ULC-S540, STANDARD FOR RESIDENTIAL FIRE AND LIFE SAFETY WARNING SYSTEMS: INSTALLATION, INSPECTION, TESTING AND MAINTENANCE

CAN/ULC-S541 (Binational with ANSI/UL 1480), STANDARD FOR SPEAKERS FOR FIRE ALARM SYSTEMS, INCLUDING ACCESSORIES

ULC-S545, STANDARD FOR RESIDENTIAL FIRE WARNING SYSTEM CONTROL UNITS

CAN/ULC-S548, STANDARD FOR DEVICES AND ACCESSORIES FOR WATER TYPE EXTINGUISHING SYSTEMS

CAN/ULC-S552, STANDARD FOR INSPECTION, TESTING AND MAINTENANCE OF SMOKE ALARMS

CAN/ULC-S553, STANDARD FOR INSTALLATION OF SMOKE ALARMS

CAN/ULC-S559, STANDARD FOR EQUIPMENT FOR FIRE SIGNAL RECEIVING CENTRES AND SYSTEMS

CAN/ULC-S561, STANDARD FOR INSTALLATION AND SERVICES FOR FIRE SIGNAL RECEIVING CENTRES AND SYSTEMS

CAN/ULC-S572, STANDARD FOR PHOTOLUMINESCENT AND SELF-LUMINOUS EXIT SIGNS AND PATH MARKING

CAN/ULC-S573, STANDARD FOR INSTALLATION OF ANCILLARY DEVICES CONNECTED TO FIRE ALARM SYSTEMS

CAN/ULC-S576, STANDARD FOR MASS NOTIFICATION SYSTEM EQUIPMENT AND ACCESSORIES

CAN/ULC-S588, STANDARD FOR GAS AND VAPOUR DETECTORS AND SENSORS, INCLUDING ACCESSORIES

CAN/ULC-S590, STANDARD FOR DESIGN, INSTALLATION, INSPECTION, TESTING AND MAINTENANCE OF SAFETY WAY GUIDANCE SYSTEM

CAN/ULC-S1001, STANDARD FOR INTEGRATED SYSTEMS TESTING OF FIRE PROTECTION AND LIFE SAFETY SYSTEMS

CAN/ULC-S1001, INTEGRATED SYSTEMS TESTING OF FIRE PROTECTION AND LIFE SAFETY SYSTEMS

Fred Leber Caitlin D’Onofrio
S500G FIREFIGHTING FOAMS

CAN/ULC-S560, STANDARD FOR CATEGORY 3 AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATES

ULC-S562, STANDARD FOR CLASS “A” FOAMS

CAN/ULC-S563, STANDARD FOR CATEGORY 3 FILM-FORMING FLUOROPROTEIN (FFFP) FOAM LIQUID CONCENTRATES

ULC-S564, STANDARD FOR CATEGORIES 1 AND 2 FOAM LIQUID CONCENTRATES

Diane
Haithcock
Griff
Edwards
S600A STATIONARY STEEL STORAGE CONTAINERS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS

CAN/ULC-S601, STANDARD FOR SHOP FABRICATED STEEL ABOVEGROUND TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS

CAN/ULC-S602, STANDARD FOR ABOVEGROUND STEEL TANKS FOR FUEL OIL AND LUBRICATING OIL

CAN/ULC-S603, STANDARD FOR STEEL UNDERGROUND TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS

CAN/ULC-S603.1, EXTERNAL CORROSION PROTECTION SYSTEMS FOR STEEL UNDERGROUND TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS

ULC-S618, STANDARD FOR ANODES AND REFERENCE ELECTRODES FOR CATHODIC PROTECTION OF STEEL UNDERGROUND TANKS

CAN/ULC-S652, STANDARD FOR TANK ASSEMBLIES FOR COLLECTION, STORAGE AND REMOVAL OF USED OIL

CAN/ULC-S653, ABOVEGROUND STEEL CONTAINED TANK ASSEMBLIES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS

ULC-S655, STANDARD FOR ABOVEGROUND PROTECTED TANK ASSEMBLIES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS

CAN/ULC-S676, STANDARD FOR REFURBISHING OF STORAGE TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS

CAN/ULC-S677, STANDARD FOR FIRE TESTED ABOVEGROUND TANK ASSEMBLIES FOR FLAMMABLE AND CONBUSTIBLE LIQUIDS

John Wade Caitlin D’Onofrio
S600B STATIONARY NON-METALLIC STORAGE CONTAINERS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS

CAN/ULC-S615, STANDARD FOR REINFORCED PLASTIC UNDERGROUND TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS

CAN/ULC-S668, STANDARD FOR LINERS USED FOR SECONDARY CONTAINMENT OF ABOVEGROUND FLAMMABLE AND COMBUSTIBLE LIQUID TANKS

CAN/ULC-S669, STANDARD FOR INTERNAL RETROFIT SYSTEMS FOR UNDERGROUND TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS

CAN/ULC-S670, STANDARD FOR ABOVEGROUND NONMETALLIC TANKS FOR FUEL OIL AND OTHER COMBUSTIBLE LIQUIDS

John Wade Caitlin D’Onofrio
S600E FACTORY-BUILT FIREPLACES, CHIMNEYS AND VENTS

CAN/ULC-S604, STANDARD FOR FACTORY-BUILT TYPE A CHIMNEYS

CAN/ULC-S605, STANDARD FOR GAS VENTS

CAN/ULC-S609, STANDARD FOR LOW TEMPERATURE VENTS TYPE L

CAN/ULC-S610, STANDARD FOR FACTORY-BUILT FIREPLACE SYSTEMS

ULC-S627, STANDARD FOR SPACE HEATERS FOR USE WITH SOLID FUEL

ULC-S628, STANDARD FOR FIREPLACE INSERTS

CAN/ULC-S629, STANDARD FOR 650°C FACTORY-BUILT CHIMNEYS

CAN/ULC-S632, STANDARD FOR HEAT SHIELDS

CAN/ULC-S635, STANDARD FOR LINING SYSTEMS FOR EXISTING MASONRY OR FACTORY-BUILT CHIMNEYS AND VENTS

ULC-S636, STANDARD FOR TYPE BH GAS VENTING SYSTEMS

CAN/ULC-S639, STANDARD FOR STEEL LINER ASSEMBLIES FOR SOLID-FUEL BURNING MASONRY FIREPLACES

CAN/ULC-S640, STANDARD FOR LINING SYSTEMS FOR NEW MASONRY CHIMNEYS

CAN/ULC-S641, STANDARD FOR FACTORY-BUILT CHIMNEY CONNECTORS AND WALL PASS-THROUGH ASSEMBLIES

CAN/ULC-S674, STANDARD FOR UNVENTED ALCOHOL FUEL BURNING DECORATIVE APPLIANCES

John Wade Gillian Wintonic
S600H FITTINGS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS

CAN/ULC-S612, STANDARD FOR HOSE AND HOSE ASSEMBLIES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS

CAN/ULC-S620, STANDARD FOR HOSE NOZZLEVALVES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS

CAN/ULC-S633, STANDARD FOR FLEXIBLE CONNECTOR PIPING FOR FUELS

CAN/ULC-S634, STANDARD FOR HOSE SWIVEL CONNECTORS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS

CAN/ULC-S642, STANDARD FOR COMPOUNDS AND TAPE FOR THREADED PIPE JOINTS

CAN/ULC-S644, EMERGENCY BREAKAWAY FITTING FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS

ULC-S651, EMERGENCY VALVES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS

CAN/ULC-S660, STANDARD FOR NONMETALLIC UNDERGROUND PIPING FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS

CAN/ULC-S664, STANDARD FOR CONTAINMENT SUMPS, SUMP FITTINGS, AND ACCESSORIES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS

CAN/ULC-S675.1, STANDARD FOR VOLUMETRIC LEAK DETECTION DEVICES FOR UNDERGROUND AND ABOVEGROUND STORAGE TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS

CAN/ULC-S675.2, STANDARD FOR NONVOLUMETRIC LEAK DETECTION DEVICES FOR UNDERGROUND AND ABOVEGROUND STORAGE TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS

John Wade Caitlin D’Onofrio
S600K KITCHEN EXHAUST EQUIPMENT AND SYSTEMS

CAN/ULC-S645, STANDARD FOR POWER ROOF VENTILATORS FOR COMMERCIAL AND INSTITUTIONAL KITCHEN EXHAUST SYSTEMS

CAN/ULC-S646, STANDARD FOR EXHAUST HOODS AND RELATED CONTROLS FOR COMMERCIAL AND INSTITUTIONAL COOKING EQUIPMENT

CAN/ULC-S647, STANDARD FOR EXHAUST CLEANING AND RECIRCULATION ASSEMBLIES FOR COMMERCIAL AND INSTITUTIONAL KITCHEN EXHAUST SYSTEMS

CAN-ULC-S649, STANDARD FOR GREASE FILTERS FOR COMMERCIAL AND INSTITUTIONAL KITCHEN EXHAUST SYSTEMS

CAN/ULC-S662, STANDARD FOR FACTORY-BUILT GREASE DUCTS

Chris Dineley Nicolette Weeks
S600L OIL-WATER SEPARATORS

ULC-S656, STANDARD FOR OIL-WATER SEPARATORS

John Wade Caitlin D’Onofrio
S700 PERFORMANCE AND EMERGENCY USE IN THE BUILT ENVIRONMENT

CAN/ULC-S701.1, STANDARD FOR THERMAL INSULATION, POLYSTYRENE BOARDS

CAN/ULC-S702.1, STANDARD FOR MINERAL FIBRE THERMAL INSULATION FOR BUILDINGS: PART 1: MATERIAL SPECIFICATION

ULC-S702.2, STANDARD FOR MINERAL FIBRE THERMAL INSULATION FOR BUILDINGS, PART 2: INSTALLATION

CAN/ULC-S703, STANDARD FOR CELLULOSE FIBRE INSULATION (CFI) FOR BUILDINGS

CAN/ULC-S704.1, STANDARD FOR THERMAL INSULATION, POLYURETHANE AND PLYISOCYANURATE, BOARDS, FACED

CAN/ULC-S705.1, STANDARD FOR THERMAL INSULATION – SPRAY APPLIED RIGID POLYURETHANE FOAM, MEDIUM DENSITY – MATERIAL – SPECIFICATION

CAN/ULC-S705.2, STANDARD FOR THERMAL INSULATION – SPRAY APPLIED RIGID POLYURETHANE FOAM, MEDIUM DENSITY – INSTALLATION

CAN/ULC-S706.1, STANDARD FOR WOOD FIBRE INSULATING BOARDS FOR BUILDINGS

CAN/ULC-S710.1, STANDARD FOR THERMAL INSULATION – BEAD-APPLIED ONE COMPONENT POLYURETHANE AIR SEALANT FOAM, PART 1: MATERIAL SPECIFICATION

CAN/ULC-S711.1, STANDARD FOR THERMAL INSULATION – BEAD-APPLIED TWO COMPONENT POLYURETHANE AIR SEALANT FOAM, PART 1: MATERIAL SPECIFICATION

CAN/ULC-S712.1, STANDARD FOR THERMAL INSULATION – LIGHT DENSITY, OPEN CELL SPRAY APPLIED SEMI-RIGID POLYURETHANE FOAM – MATERIAL SPECIFICATION

CAN/ULC- S712.2, STANDARD FOR THERMAL INSULATION – LIGHT DENSITY, OPEN CELL SPRAY APPLIED SEMI-RIGID POLYURETHANE FOAM – INSTALLATION

CAN/ULC- S716.1, STANDARD FOR EXTERIOR INSULATION AND FINISH SYSTEMS (EIFS) – MATERIALS AND SYSTEMS

CAN/ULC-S716.2, STANDARD FOR EXTERIOR INSULATION AND FINISH SYSTEMS (EIFS) – INSTALLATION OF EIFS COMPONENTS AND WATER RESISTIVE BARRIER

CAN/ULC-S716.3, STANDARD FOR EXTERIOR INSULATION AND FINISH SYSTEMS (EIFS) – DESIGN APPLICATION

CAN/ULC-S717.1, STANDARD FOR FLAT WALL INSULATING CONCRETE FORM (ICF) UNITS – MATERIAL PROPERTIES

CAN/ULC-S718, SITE QUALITY ASSURANCE PROGRAM FOR SPRAY APPLIED POLYURETHANE FOAM

CAN/ULC-S741, STANDARD FOR AIR BARRIER MATERIALS – SPECIFICATION

CAN/ULC-S742, STANDARD FOR AIR BARRIER ASSEMBLIES – SPECIFICATION

CAN/ULC-S770, STANDARD TEST METHOD FOR DETERMINATION OF LONG-TERM THERMAL RESISTANCE OF CLOSED-CELL THERMAL INSULATING FOAMS

ULC-S771.1, GUIDE FOR PREPARING THERMAL INSULATION STANDARDS, PART 1 – MATERIAL SPECIFICATION

CAN/ULC-S773, STANDARD FOR THERMAL INSULATION TERMINOLOGY

CAN/ULC-S774, STANDARD LABORATORY GUIDE FOR THE DETERMINATION OF VOLATILE ORGANIC COMPOUND EMISSIONS FROM POLYURETHANE FOAM

Laverne Dalgleish Kevin HF Wu
S800A  ELECTRIC UTILITY WORKPLACE ELECTRICAL SAFETY

CAN/ULC-S801, Standard for Electric Utility Workplace Electrical Safety for Generation, Transmission, and Distribution

Gillian Wintonic
S1200A PREVENTION OF STORM AND SANITARY BACKFLOW

CAN/ULC-S1201, SENSOR OPERATED BACKWATER PREVENTION SYSTEMS

Joe Musso Amy Walker
S2200A STATIONARY ENGINE GENERATOR ASSEMBLIES Diana Pappas Jordan Jonette Herman
S6200A CONTROLS FOR STATIONARY ENGINE DRIVEN ASSEMBLIES Diana Pappas Jordan Derrick Martin

See ULC CSDS